| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Shanghai Venttech refrigeration equipment Co., Ltd. is a professional dry air cooler for bitcoin immersion cooling system, condenser, evaporator manufacturer in China, which has more 17 years experience in HVAC area.
|
Air discharge direction |
|
|
Performance ranges |
Cooling capacity: from 148 to 921 kw |
|
High efficiency heat exchanger |
Capacity designs for maximizing the heat transfer relative to the energy consumption of the fan. |
|
Fan |
Only choose low specific energy consumption fans. |
|
Testing |
Heat exchangers are supplied clean and tested at a pressure of 30 bars |
|
Options |
Coil design refrigerant: water, oil, glycol,BC-888. |
| Dry cooler -- D1 series | ||||
| Model | Unit | D1-005-1X350 | D1-006-1X350 | D1-007-1X350 |
| Capacity(water) | Kw | 4.89 | 5.90 | 6.83 |
| Capacity (20% Glycol) |
Kw | 4.72 | 5.69 | 6.69 |
| Water flow | m³/h | 0.85 | 1.03 | 1.20 |
| Pressure Drop | kPa | 36.00 | 31.00 | 58.00 |
| Air volume | m³/h | 2828 | 2712 | 2492 |
| Fan | Qty x Φ | 1XΦ350 | 1xΦ350 | 1xΦ350 |
| Noise level | dB(A) 10m | 31 | 31 | 31 |
| Dimension(L*W*H) | mm | 870*525*797 | 870*525*797 | 870*525*797 |
What is adiabatic cooling?
Adiabatic cooling systems function similarly to dry cooling systems, but with the incorporation of pre-cooling pads; running water over pre-cooling pads and drawing air through the pads depresses the ambient dry bulb of the incoming air. The depressed dry bulb allows for greater system heat rejection.
The result of this is that adiabatic systems are highly effective in hot, dry environments, while using less water than traditional evaporative units. Adiabatic cooling units also deliver the required cooling capacity in a smaller footprint and/or lower fan motor horsepower than a completely dry cooler/condenser.
Where are adiabatic cooling systems a good fit?
Adiabatic cooling systems can be a good technical and economic fit in hot, dry climates, especially where water supplies are scarce and costs are high. They can also be a good match where outside air temperatures are cool enough for most of the year for air-cooled fluid coolers or refrigerant condensers to operate efficiently.
The data center industry has employed adiabatic cooling technology on the air side for air handlers for years. With the development of new adiabatic designs applied to fluid coolers and refrigerant condensers and the increasing scarcity of water, adiabatic cooling systems are seeing wider use across a range of industries and applications.
Our service
){kind=link}