2022 Floor Standing Industrial Dry Cooling Tower

• Customization: Available
• Type: Air-Cooled
• Cooling Water: Industrial Water
• Model NO.: SHSL-D1-014-1X500F2
• System Type: Closed System
• Fans Species: Frequency Fan
• Noise Level: Low
• Application Fields: Machinery
• Certification: RoHS, ISO
• Condition: New
• Product Name: 2017 Floor Standing Industrial Air Dry Cooler
• Cooling Capacity: 17.6kw
• Air Flow: 8137CMH
• Surface: 73m2
• Power Supply: 380V-3pH-50Hz
• Total Motor Power: 0.83kw
• Total Current: 1.45A
• Dry Weight: 75kg
• Design Pressure: 2.0MPa
• Testing Pressure: 2.5MPa
• Transport Package: Wrap Film/Pallet
• Specification: refrigerant unit
• Trademark: VENTTK
• Origin: China
• HS Code: 8415901000
• Production Capacity: 100units/Month

Product Description

2017 Floor standing industrial air dry cooler
 
Dry Coolers are widely used in refrigeration, air-conditioning, food processing, heating plants and power plants.

General productions:
Suitable environment
Dry Cooler series:D1 and D2 series.
Environment temperature:  35ºC.
Air does not contain chemical substances, corrosive gasses and dust-free;
Please specify requirements for explosion-proof upon order
Design Conditions:   Design pressure 2.0MPa; Test pressure 2.5MPa                
Medium: WATER    
Working conditions:

Environment	Specifications
Ambient Temperature 35ºC,                                  Inlet Temperature 48 ºC,Outlet Temperature 39 ºC	D4 Series

 
Details:

Sign	Name	Function
A	Stand	Fix equipment
B	MetalSheet Casing	Galvanized Steel Coated Casing
C	Cooling Coil	Al Fin and Copper Tube
D	Fan	Low Energy consumption fan to maximize air flow and low noise

 

Drycooler
Capacity:15KW	Medium: ethylene glycol 34 vol%
Surface reserve:5.7%	Inlet:45ºC
airflow:5810m³/h	outlet:40ºC
airinlet:32ºC	presure drop:0.52bar
altitude:1500m	volume flow:2.79m³/h
Fans(AC): 1piece3~400V50Hz	Noise pressure level:42dB(A)
data per motor(nominal data):	at a distance of:10m
speed:1180min-1/1350min-1	Noise power level:73dB(A)
capacity(el) 0.55kw	E
current:0.90A
total el power consumption:0.45KW	energy sfficiency class:E(2014)
casing:Galv.sheet.RAL 7035	Tube: copper
surface:82m2	fins:aluminum
tube volume:10.81	connections per unit:
fin spacing:2.4mm	inlet:28*1.5mm
dry weight:96kg	outlet:28*1.5mm
Max.operation pressure:16bar	PED classification:Art.3.par.3

Site assessment
Selected installation site must meet the following requirements:
Level Ground;
Ground or Floor strength able to support the wedight of equipment;
no obstructions at air outlet.
Upon confirming above conditions, take the following installation steps. Forklift or lifting product out of wooden pallets, loosen transport screw at stand and tighten after raising the screws to same horizontal plane as product. After moving product to the predetermined location, bolt tightly with large washer and spring washer.
 

Warning

Minimize bias and ensure the level of the product during installation.
Ensure tubes level and no loosen parts in dry cooler
During installation, avoid weight of pipeline on the dry coolers.  

 
 Wiring
Power requirements:       
Axial Fan power wiring: Axial fans are often using one phase or 3 phase motor. The 3 phase motor has two configuration, Y-shape and △Shape
Fan motor should have reliable power supply equipped with over voltage, under voltage and over current protection. Each fan is equipped with current protection settings. Internal thermal protection devise should be connected to the control lines to prevent damage to the motor due to over voltage, under voltage, lack of phase, contact failure. Motor wiring shall be installed according to the requirements when using two-speed motor.

 
warning
 

Motor overcurrent protection and built in thermal protection settings must be connected.
Electrical connections must be completed by qualified professionals
Ensure wiring are correct and accurate to prevent motor failure

 
Electrical Installation

 
Warning
 

Equipment installation must be done by qualified personnel
Ensure all electrical circuits are installed in accordance GB 8877-88(household appliances installation, use, maintenance and safety requirements) or any other local regulations
Equipment shall be safely grounded with resistance less than 2Ω
Ensure all fan connecting cables are according to required standards of fan manufacturers.

 
Equipment commissioning
4.1  power on check
Check to ensure all requirements above are met. All requirements is to be met before trial run. Ensure all accessories are installed securely before powering on.
 
4.2  Power supply check
Ensure voltage and power supply matches name plate by measuring equipment and is safely grounded with less than 2ohm before power up.
 
4.3  Trial Operation
Ensure each fan is tighten and is not obstructed prior to commissioning. Rotation of the motor must be accordance with the factory specification. Ensure no jamming and free rotation to fan and motor. 

Photos show: