Centrifugal compressor inter-stage shell and tube condenser
Shell tube heat exchanger /shell and tube condensers are currently the most popular type of condensers used worldwide.VENTTK has manufactured and installed shell and tube condensers for a wide range of applications. Custom engineering capabilities and application oriented features ensure a shell and tube condenser that is a perfect match to your requirements.
1. 3 phase chiller equipment as Blitz complete with 3HP compressor, the defrost heater, pressure guage, condensing model MALQ-400C1, Condenser fans 2 x 120 operation weight 226kg,
rack type C, evaporator unit model K4L2,85/2,4-10 to 4 centigrate,
refrigerant R-410 evaporating unit
2. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
3. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
4. different alternative condensing fans available: shaded pole or outer rotor fan motor.
5.did gas examination under 3.0Mpa air pressure to ensure the tightness.
6.widely used in refrigeration industry, cold room and other cooling system.
7. we can supply products as per customized samples or drawing.
8.producing procedure: tube bending, punching fin, expanding, digressing, drying, welding, leakage test, bending, inspection, packing.
They are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded to the outer shell) is available. Can also be used on fixed tube sheet heat exchangers.
Process liquid or gas cooling
Process or refrigerant vapor or steam condensing
Process liquid, steam or refrigerant evaporation
Process heat removal and preheating of feed water
Thermal energy conservation efforts, heat recovery
Compressor, turbine and engine cooling, oil and jacket water
Hydraulic and lube oil cooling
1.Less expensive as compared to other type coolers.
2.Can be used in systems with a wide range operating temperatures and pressures.
3.Pressure drop across a shell and tube heat exchangers is less.
4.Tube leaks are easily located and plugged since pressure test is comparatively easy.
5.Tubular coolers in refrigeration system can act as receiver also.
6.Using sacrificial anodes protects the whole cooling system against corrosion.
7.Extended heat transfer surfaces (fins) can be used to enhance heat transfer.
8.Cleaning and repair are relatively straightforward, because the equipment can be dismantled for this purpose
9.The heat exchanger has two type including horizontal and vertical styles, so it can be installed in different locations conveniently.
|Reaction Tank |
|Material:||SS304 or SS316L or Duplex stainless or 904L |
|Design Pressure:||-1 -20 Bar (g) |
|Work Temperature:||0-200 °C|
|Construction :||Vertical type or Lifting lug type |
|Jacket type :||Dimple jacket, full jacket, or coil jacket |
|Structure :|| vessel with jacket, vessel with jacket and insulation ,vessel with coil jacket|
|Heating or cooling function ||According to the heating or cooling requirement ,|
the tank will have jacket for requried function
|Opitional Motor:||ABB, Siemens, SEW or Chinese brand |
|Surface Finish:||Mirror Polish or Matt polish or Acid wash&pickling or 2B|
|Standard components :||Manhole,sight glass , cleaning ball |
|Optional components :||Vent filter, Temp. Gauge, display on the gauge directly on the vessel |
Temp sensor PT100, digital display on the control cabinet by instrument
Temp sensor with control for heating and cooling Level gauge with digital
display on the control cabinet by instrument Load cell Valves
|Applications:||Wine, Beer Juices Food & Beverage Pharmaceutical Biotechnology & |
Laboratory Medical &Medical , Chemical Industry Painting Industrial,