High Efficiency Industrial Scroll Type Air Cooled Water Chiller

• Customization: Available
• Type: Air-Cooled
• Cooling Method: Air-cooled
• Model NO.: RSF115
• Selected Voltage: 380V/50HZ
• Compressor Number: 2
• Noise Level: Low
• Application Fields: Cooling System
• Application Machine: Machining Center
• Certification: RoHS, ISO, CE
• Condition: New
• Product Name: High Efficiency Industrial Scroll Type Air Cooled
• Cooling Capacity: 85kw
• Run Control: PLC Microcomputer Control
• Compressor: Semi-Closed 5:6 Asymmetric Twin-Screw Compressor
• Heating Capacity: 95kw
• Rated Current: 58A
• Energy Regulation: 0-25%-50%-75%-100%
• Evaporator: Flooded Heat Exchanger
• Condenser: Shell and Tube Heat Exchanger
• Refrigerant: R22
• Transport Package: Wrap Film/Pallet
• Specification: refrigerant unit
• Trademark: VENTTK/OEM
• Origin: China
• HS Code: 8418692090
• Production Capacity: 50units/Month

Product Description

   

High Efficiency Industrial Scroll Type Air Cooled Water Chiller

Features
1.World famous brand new type and high-efficient screw-rotor compressor, with efficiency 20%~30% higher than those common ones. It has obtained several patents of Europe and America countries and passed the international quality certification of ISO9001.
2.High efficiency 5-to-6 rotor profile patent.
3.Capacity control apply to four-step (100%-75%-50%-25%),three-step (100%-66%-33%) and no step control system.
4.With 11 bearings and a balance piston against axial thrust. This extends longer bearings life 2.5 to 3.5 times than traditional design.
5.Designed with efficient silicon steel and special slots , and equipped with the inside and outside all around design to cool the flow channel so to ensure maximum efficiency of the compressor motor under any load.
6.Built-in oil pressing system ensure compressor maintaining the optimal lubricity without oil pump.
7.High efficiency double filtration oil separator ensures maxinum heat exchanger.
8.Efficient, low noise and small vibration.
9.Various options of refrigerants, R22, environment-friendly R134A, R407C etc.
10.All-wave compressor volume ratio(Vi=2.2/2.6/3.0/3.5) for selection to avoid the extra energy consumption caused by over or under compression.
 
Model list

Model  Item					040WSH		050WSH		060WSH		075WSH		085WSH		100WSH		120WSH
Nominal cooling capacity				kcal/h	103888		130204		152564		212420		241660		276060		342280
				kw	120.8		151.4		177.4		247		281		321		398
Total input power				kw	30.9		37.9		43.3		56.8		65		74		90.3
Max.Running current				A	71		84		128		123		140		160		195
Power					3PH-380V-50HZ(200V/220V/415V 50HZ/60HZ)
Refrigerant		Type			R22
		Refrigerant charge		kg	22		27		33		42		48		55		68
		Control method			thermostatic expansion valve
Compressor		Type			Semi-hermetic screw
		Power		kw	30.9		37.9		43.3		56.8		65		74		90.3
		Start-up mode			Y-△
		Capacity control		%	0-25-50-75-100
Evaporator		Type			Shell and Tube
		Chilled fluid flow		m3/h	20.7		26.0		30.4		42.3		48.2		55.0		68.2
		Inlet/outlet pipe diameter		Inch	3"		3"		3"		3"		4"		4"		4"
Condenser		Type			Shell and Tube
		Cooling water flow		m3/h	26.0	32.5		37.8		52.1		59.3		67.7		83.7
		Inlet/outlet pipe caliber		Inch	3"	3"		3"		3"		4"		4"		4"
Safety protection					Compressor over temperature,over current,high and low pressure,over temperature,flow switch, phase sequence,phase-missing,exhaust Overheating,anti-freezing.
Dimension	Length		mm		1960	2130		2450		2450		2750		2750		2750
	Width		mm		855	855		985		985		1050		1050		1050
	Height		mm		1540	1540		1600		1600		1600		1600		1730
Net weight					820	950		1120		1300		1560		1720		2030
Running weight					970	1060		1270		1480		1780		1960		2250

1.Transportation of unit
(1). The chiller is packed in standard wooden box. We suggest hoisting if conditions warrant it. The forklift can be used during ground transportation. If the hoisting is made after the removal of packaging, pay attention not to put too much pressure on the chiller box. If necessary with the supporting rod to hoist.
(2). The units with wheel can be rolled on the ground and the units must keep balance
(3). Whatever way to transport, it must be carefully not to sway over not to collide so as not to damage
the equipment or endanger the safety of people.
★Not to use the forklift to transport the units after the package removed!
2.Installation of unit
(1).How to choose the installation location
Unit suitable for installation in the ambient temperature of -10~43 degrees, relative humidity of not more than 80% of the rain-proof shelter, or with the external environment has good ventilation conditions of indoor. In the wind direction is not less than 2meters of space, in a side condenser inlet wind direction should have 1.5~2meters of space. Units to be placed in no less than 20cm level solid concrete foundation, DLP-10AS and larger units with damping device, using the anchor bolt. Around the unit should have a working space, to facilitate the operation, inspection and maintenance.