Product Overview
Integral stamping streamline air inlet
Copper tube string sets of highly efficient two-way cracked aluminum fins
Innovative air inlet flange design
The water receiving tray is formed by one-time stamping and inclined installation
The left and right type of the unit can be interchanged freely on site, and the rear return air and lower return air can be freely swapped on site.
Structural characteristics
Fan
Stable and stable operation, low noise-the use of a streamlined air inlet with integrated stamping, smooth air flow, small loss, compact structure, high strength, can reduce the noise of the impeller at high speed. Apply thread-locking glue to the impeller fixing bolt, and then fix the impeller firmly on the motor shaft with a fixed torque wrench. Each fan has gone through four dynamic and static balance tests of the middle plate, impeller, complete machine, and factory license, and truly achieves high reliability.
Coil
High heat transfer efficiency, rich in cold and heat-using copper tube string sets of high-efficiency bidirectional cracked aluminum fins, sinusoidal bidirectional cracks with windows and full form, arranged in an orderly and hierarchical manner, which fully increases the heat transfer area and improves Heat transfer efficiency. The copper tube and aluminum foil are tightly combined through a precise mechanical tube expansion device, which fully improves the heat transfer efficiency.
Water tray
Smooth drainage and no stagnant water-using one-time stamping: no welding at the four corners, no rust, no water leakage, overall PE insulation, no joints, no bubbles, and no condensation. In addition, the diversion structure is stamped in the water receiving tray, and the inclined installation is specially designed when it is installed on the unit, so that the condensed water is discharged more smoothly, and no water is generated in the water receiving tray.
Motor
Durable and low noise--Single-phase capacitor motor, three-speed adjustable, sufficient overload capacity, withstand voltage AC1000 for 1 minute, high-precision high-quality ball bearing, no need to refuel, self-lubrication, low noise, running life> 70000h The central axis is quenched and tempered and the surface is anticorrosive. The design of the hexagonal hole and the rivet nut improves the safety performance of the fan support plate and bolt connection. It will not slip and loosen. A torque pneumatic wrench is used to make the motor more reliably connected to the fan support plate.
The best match for central air-conditioning
The latest fan coil unit is carefully designed and manufactured based on the characteristics of excellent products at home and abroad, and can be widely used in shopping malls, hospitals, office buildings and other places. Compact structure, novel shape, abundant heat and cold, low noise, convenient installation and maintenance, it is your ideal choice product.
Diverse types: There are horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, vertical and horizontal, wall-mounted, luxurious vertical exposed, ceiling embedded four-blowing and two hair dryer coil for selection.
Complete specifications: air volume range from 190-5950m3 / h, cooling capacity range from 1770-29700W, static pressure types are 12Pa 30Pa 50Pa 120Pa, etc. There are two types of heat exchangers, divided into 2 rows and 3 rows, 2 + 1 And 3 + 1.
Technical Specification
| TYPE |
PICTURE |
MODEL |
AIR VOLUME |
|
COOLING CAPACITY |
HEATING CAPACITY |
POWER |
| m3/h |
CFM |
W |
W |
SUPPLY |
DUCTED FAN COIL
(2 PIPE SYSTEM) |
|
MFP-34WA |
340 |
200 |
1800 |
2700 |
208-230V/1/50Hz |
| MFP-51WA |
510 |
300 |
2700 |
4050 |
208-230V/1/50Hz |
| MFP-68WA |
680 |
400 |
3600 |
5400 |
208-230V/1/50Hz |
| MFP-85WA |
850 |
500 |
4500 |
6750 |
208-230V/1/50Hz |
| MFP-102WA |
1020 |
600 |
5400 |
8100 |
208-230V/1/50Hz |
| MFP-136WA |
1360 |
800 |
7200 |
10800 |
208-230V/1/50Hz |
| MFP-170WA |
1700 |
1000 |
9000 |
13500 |
208-230V/1/50Hz |
| MFP-204WA |
2040 |
1200 |
10800 |
16200 |
208-230V/1/50Hz |
| MFP-238WA |
2380 |
1400 |
12600 |
18900 |
208-230V/1/50Hz |
DUCTED FAN COIL
(4 PIPE SYSTEM) |
MFP-34WA4 |
340 |
200 |
1800 |
1080 |
208-230V/1/50Hz |
| MFP-51WA4 |
510 |
300 |
2700 |
1620 |
208-230V/1/50Hz |
| MFP-68WA4 |
680 |
400 |
3600 |
2160 |
208-230V/1/50Hz |
| MFP-85WA4 |
850 |
500 |
4500 |
2700 |
208-230V/1/50Hz |
| MFP-102WA4 |
1020 |
600 |
5400 |
3240 |
208-230V/1/50Hz |
| MFP-136WA4 |
1360 |
800 |
7200 |
4320 |
208-230V/1/50Hz |
| MFP-170WA4 |
1700 |
1000 |
9000 |
5400 |
208-230V/1/50Hz |
| MFP-204WA4 |
2040 |
1200 |
10800 |
6480 |
208-230V/1/50Hz |
| MFP-238WA4 |
2380 |
1400 |
12600 |
7560 |
208-230V/1/50Hz |
| Type |
2-pipe cassette type fan coil(4-way)
|
| Model No. |
MFP-34KM-Q1EE1 |
MFP-51KM-Q1EE1 |
MFP-68KM-Q1EE1 |
MFP-85KM-Q1EE2 |
MFP-102KM-Q1EE2 |
MFP-136KM-Q1EE3 |
MFP-170KM-Q1EE3 |
| Cooling capacity |
W |
1800 |
2700 |
3600 |
4500 |
5400 |
7200 |
9000 |
| Heating capacity |
W |
2700 |
4050 |
5400 |
6750 |
8100 |
10800 |
13500 |
| air volume |
m3/h |
340 |
510 |
680 |
850 |
1020 |
1360 |
1700 |
| Power supply |
220V/1/50Hz |
220V/1/50Hz |
220V/1/50Hz |
220V/1/50Hz |
220V/1/50Hz |
220V/1/50Hz |
220V/1/50Hz |
| Power input |
W |
37 |
52 |
62 |
76 |
96 |
134 |
152 |
| Remark |
water pump inside,2 tubes |
| Net dimensions (W x H x D) |
panel |
mm |
650*650*45 |
650*650*45 |
650*650*45 |
850*850*45 |
850*850*45 |
950*950*45 |
950*950*45 |
| unit |
590*590*270 |
590*590*270 |
590*590*270 |
752*752*293 |
752*752*293 |
822*822*243 |
822*822*293 |
| Packing dimensions (W x H x D) |
panel |
mm |
745*745*100 |
745*745*100 |
745*745*100 |
910*910*100 |
910*910*100 |
1005*1005*100 |
1005*1005*100 |
| unit |
700*700*300 |
700*700*300 |
700*700*300 |
805*805*330 |
805*805*330 |
875*875*305 |
875*875*335 |
| Net weight |
panel |
kg |
2.2 |
2.2 |
2.2 |
4.5 |
4.5 |
6 |
6 |
| unit |
19 |
19 |
20 |
23 |
23 |
25 |
28 |
| Gross weight |
panel |
kg |
4 |
4 |
4 |
6.5 |
6.5 |
9 |
9 |
| unit |
21 |
21 |
22 |
26 |
26 |
28 |
31 |
| Picture |
|
Audited Supplier 
){kind=link}
){kind=link}