Chilled Water High Wall Mounted Type Fan Coil Unit (FCU) for Hotel HVAC cooling and heating
high wall FAN COIL UNIT model:
| MODEL |
AIR VOLUME |
COOLING CAPACITY |
HEATING CAPACITY |
| m3/h |
CFM |
W |
W |
| MFP-34BM |
340 |
200 |
1800 |
2700 |
| MFP-51BM |
510 |
300 |
2700 |
4050 |
| MFP-68BM |
680 |
400 |
3600 |
5400 |
| MFP-85BM |
850 |
500 |
4500 |
6750 |
| MFP-102BM |
1020 |
600 |
5400 |
8100 |
| MFP-136BM |
1360 |
800 |
7200 |
10800 |
high wall FAN COIL UNIT Features:
1. 4-way air flowing, which can uniform temperature distribution in the room.
2. Thin design unit which can be installed in a limit ceiling(the Min. thickness is 290mm.
3. Specially design to avoid the air-short flowing.
4. Easy to be installed,Low installation cost.
5. Remote controller is standard and wire controller is optional.
6. Auto swing.
7. Quiet running.
8.High lift water drained pump(750mm).
9. Float switch inside to prevent from leaking.
10. External drained part is optional.
11. Fresh air can be input from outdoor to better indoor air quality.
12. Auxiliary duct is available to send part of air to other place, in order to improve indoo.r temperatuerl air equality.
13. Negative ion generator is optional.
14. Griall is optional to prevent from hand injury.
15. "C"type heat exchanger, blue fin.
16. Fan and fan motor is easy to maintain.
17. Square panels ,which can choose the direction of inlet/outlet water connection freely.
18. The dimension of K1 unit is only 570×570mm, which can be installed in a standard ceiling opening.
19. Easily interfaced with most widely used Mod-Bus and proprietary supervisory system based on mod Bus protocol.
20. Water valve installed is optional.
21. 4-tube system is optional.
Audited Supplier 
){kind=link}
){kind=link}