| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | Air-Cooled |
| Cooling Water: | Industrial Water |
| System Type: | Closed System |
| Fans Species: | Frequency Fan |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Environment | Specifications |
| Ambient Temperature 35ºC, Inlet Temperature 48 ºC,Outlet Temperature 39 ºC | D4 Series |
| Sign | Name | Function |
| A | Stand | Fix equipment |
| B | MetalSheet Casing | Galvanized Steel Coated Casing |
| C | Cooling Coil | Al Fin and Copper Tube |
| D | Fan | Low Energy consumption fan to maximize air flow and low noise |
| Order No. | PJO-2016SHSL08145 | Product name | Dry Cooler | Model | SHSL-D4-362-6X910F1 | Order quantity | 1 | Gist: JB/T 7659.5-1995 | ||||||
| Inspection item | Processing quality | Processing quality | Air pressure test | Insulation resistance | Electric strength | Whole set of products | Nameplate and factory file | Determine | ||||||
| Item number | COIL Length L≤1000(±2mm) L>1000(±4mm) |
COIL Diagonal D≤1000(±3mm) D>1000(±5mm) |
Fin pattern | Fin: conform to the requirements, no burr, no Rip, no pour, no dew copper, no wrinkles, no burning out. |
Sheet metal: no scratches and deformation, surface should be clean, smooth, colours and luster is consistent, uniform coating. |
With ≥1.15 times design pressure to test, no leakage and deformation. Design value: 2.5MPa |
Electric parts to ground ,to the charged metal parts of the insulation resistance(cold) ≥ 2MΩ |
1800V voltage,keep one minute, no puncture ,no flashover |
Inlet and outlet connectors;flange ,fan,electric heating tube bracket,valves and so on. |
content is complete,same with the good, factory file is complete, the specification is correct | ||||
| 2016D08145-001 | 3300/3303 3300/3304 |
3672/3675 3675/3675 |
Aluminum fin 0.115mm ,2.2mm/ Ripple |
Accord | Accord | 10min/2.5MPa |
NO | NO | Accord | Accord | Qualified | |||
Warning |
| Minimize bias and ensure the level of the product during installation. Ensure tubes level and no loosen parts in dry cooler During installation, avoid weight of pipeline on the dry coolers. |
| warning |
| Motor overcurrent protection and built in thermal protection settings must be connected. Electrical connections must be completed by qualified professionals Ensure wiring are correct and accurate to prevent motor failure |
| Warning |
| Equipment installation must be done by qualified personnel Ensure all electrical circuits are installed in accordance GB 8877-88(household appliances installation, use, maintenance and safety requirements) or any other local regulations Equipment shall be safely grounded with resistance less than 2Ω Ensure all fan connecting cables are according to required standards of fan manufacturers. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}