Chilled Water Type Fresh Air Handling Unit
|FOB Price:||US $1,088 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1,088/ Piece|
|Production Capacity:||1500units Per Month|
|Transport Package:||Export Packaging|
|Payment Terms:||T/T, Western Union|
- Model NO.: GT-WKR-40
- Air Tube Material: Galvanized Sheet
- Operating Voltage: 380/400 VAC
- Application Fields: Mechanical Engineering
- Lifetime: >20 years
- Condition: New
- Cooling Capacity: 40kw
- Supply Air: 5800
- Compressor: Efficient Scroll Closed
- Condenser: Tube Fin Heat Exchanger
- Air Filter: Initially Effect Plate Filter
- Specification: customized
- HS Code: 8415830000
- Type: Air Handling Unit
- Corrosion Durability: Higher
- Noise Level: Low
- Mounting: Floor Standing
- Certification: RoHS, ISO
- Product: Air Conditioner
- Heating Capacity: 37.1kw
- Power: 3n-380V-50Hz
- Evaporator: Tube Fin Heat Exchanger
- Refrigerant: R22/R407c
- Trademark: VENTTECH
- Origin: Shanghai, China(Mainland)
1. Air cooled rooftop air conditioner.
2. Cooling capacity: 8kw to 90kw, a variety of choices.
3. High external pressure.
4. Applicable to residential and commercial buildings, hotels, and scientific research units, factories and enterprises and so on.
|GT-WKR Series-Roof Top AHU Specifiaction 1|
|Supply air 3*||m3/h||7000|
|Static pressure 3*||Pa||300|
|Compressor||Type||Efficient scroll closed|
|Supply air fan||Type||Low noise centrifugal type|
|Evaporator||Type||Inner grooved copper tube and aluminum fin|
|Fin type 5*||Slotted fin hydrophilic aluminum fin|
|Condenser||Type||Inner grooved copper tube and aluminum fin|
|Fin type 5*||Rippled hydrophilic aluminum fin|
|Condenser fan||Type||Low noise axial type|
|Refrigerant control||External balance type thermal expansion valve|
|Air filter||Initially effect plate filter|
chilled water type fresh air handling unit Features:
1. It is packaged air conditioner which integrates condensing part, evaporating part & control part into a whole unit, firstly promoted & applied in South America, North Europe & Australia.
2. It is air cooled direct evaporation & expansion air conditioner, has no need on cooling water & chilled water system, dispenses with cooling tower/cooling water pump/chilled water pump, relative pipe work, electric control & terminal equipments, saves user investment.
3. It integrates evaporating part & condensing part into a whole unit which is installed outside to save indoor space, user will only need to install the duct, no need to connect refrigerant pipe work, it works under intellectual control without special care.
It is mainly applied to factories, schools, auditoriums, warehouses, etc.
1. Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2. Direct expansion coils with condensate drain tray.
1. High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
2. Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise.
1. Forward curve centrifugal fans for air treatment section and axial fans for condensation section.
2. Front, side and underside air discharge of the treatment unit.
3. High external pressure, long air supply distance.
1. Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components
2. Easy operation line controller
3. Error indication
4. Timing on/off
1. Economizer with fresh, return air dampers and fresh air hood
2. Free cooling function for low ambient temperature
3. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20C down to -10C
4. BMS devices
4. T3 (Tropical climate)
5. Condenser coil guard
6. Roof curb
7. Metal / aluminum filter
8. Air pressure switch for indoor fan
9. High static condenser fan option with sealed + drain condensing section
10. Optional water heating coil
11. Metal or plastic mesh on condenser coil
12. Optional supply / return air configurations
13. Upgraded evaporator fan motor drives
14. G4 filter, plate and bag filter